Modem from Ukrtelecom comes in a colorful cardboard box. The work of such models of gadgets as Hyawei HG532e, Huawei HG530, ZTE ZXV10 H108L. The router ZTE. Network equipment ZTE: setting up routers for Rostelecom. By the same principle, the ZTE ZXV10 H108L modem is configured.

ROM VER: 1.2.0 CFG 04 EEPROM Data OK U-Boot 1.1.5-2.2 (Jan 21 2011 - 17:13:36) DRAM: 16 MB relocate_code start relocate_code finish. Flash: 4 MB Flash: MXIC_MX25L3205D *** Warning - bad CRC, using default environment parse tag param success In: serial Out: serial Err: serial Net: Init chip,reset switch! Internal Clock Selected EPHY_MODE AMAZON_SE Switch Type 'run flash_nfs' to mount root filesystem over NFS Have Calibration Data *** Press 1 means entering boot mode*** Press 2 means entering testing mode*** Press 3 means entering norm mode*** Hit key to stop autoboot: 3  2  1  0 Entering norm mode. Found image at 0x00040000 foundVer = 1 ****Try the first image. ## Booting image at 00040100.

Image Name: MIPS Linux-2.6.20 Created: 2012-03-27 9:28:37 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 804942 Bytes = 786.1 kB Load Address: 80002000 Entry Point: 80268000 Verifying Checksum. OK Uncompressing Kernel Image. Save boot par ok OK Linux version 2.6.20-Amazon_SE (xia@njzd) (gcc version 3.4.4 20050119 (MIPS SDE)) #1 Tue Mar 27 17:28:32 CST 2012 Current Model:BSP_A4 This model supports only basic BSP feature on Amazon SE WLAN board with PPE A4 firmware Check boot para cksum. Boot para cksum OK! BootPara.runmode=3 CPU revision is: 0001906c Determined physical RAM map: User-defined physical RAM map: memory: 01000000 @ 00000000 (usable) Built 1 zonelists. Total pages: 4064 Kernel command line: ip=192.168.1.1:192.168.1.55::255.255.255.0::eth0:on console=ttyS0,115200 ethaddr=C8:64:C7:89:03:42 mem=16M panic=1 root=/dev/mtdblock5 Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes.

Primary data cache 8kB, 2-way, linesize 16 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 64 (order: 6, 256 bytes) mips_hpt_frequency:133333333 r4k_offset: 001333) Using 133.333 MHz high precision timer. ROM VER: 1.2.0 CFG 04 EEPROM Data OK U-Boot 1.1.5-2.2 (Jan 21 2011 - 17:13:36) DRAM: 16 MB relocate_code start relocate_code finish. Programmu dlya vzloma odnoklassnikov ok shtorm.

Flash: 4 MB Flash: MXIC_MX25L3205D *** Warning - bad CRC, using default environment parse tag param success In: serial Out: serial Err: serial Net: Init chip,reset switch! Internal Clock Selected EPHY_MODE AMAZON_SE Switch Type 'run flash_nfs' to mount root filesystem over NFS Have Calibration Data *** Press 1 means entering boot mode*** Press 2 means entering testing mode*** Press 3 means entering norm mode*** Hit key to stop autoboot: 3  2  0 Entering testing mode. Found image at 0x00040000 foundVer = 1 ****Try the first image. ## Booting image at 00040100. Image Name: MIPS Linux-2.6.20 Created: 2012-03-27 9:28:37 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 804942 Bytes = 786.1 kB Load Address: 80002000 Entry Point: 80268000 Verifying Checksum.